Sumitomo 200µm Ribbon Fusion Splicer
The Sumitomo 200µm Ribbon Fusion Splicer is designed specifically for use with freeform ribbon fiber pitched at 200µm, this Sumitomo ribbon splicer comes fully equipped with the following:
1 x T-Q101-M12-200 Mass Fusion Splicer
1 x ADC-1430Z AC adpater
1 x PC-AC2 power cord
1 x pair of FHM-12N
1 x JR-6-200 Hot Jacket Remover
1 x ACC-1220S AC Adapter
1 x PC-2 12V DC Power Cord, 1m
1 x BU-11 Battery Pack
1 x FC-6RM Fiber Cleaver with Transit Case
1 x SC-Q101 Carrying case with worktable
NOTE: This splicer will not work with conventional 250µm pictched ribbon fiber.
Sumitomo 200µm Ribbon Fusion SplicerSpecifications at a glance | ||
Items | Type-Q101-M12-200 | |
Optical fiber requirements | Material | Silica Glass |
Profile types | SMF (G.652), MMF (G6.651), DSF (G.653), NZDSF (G.655), BiF (G.657) | |
Fiber count | 12 (200µm pitch) | |
Cladding diameter | 125µm | |
Coating diameter | Ribbon fiber thickness: 200µm | |
Application cable | Freeform ribbon Cable | |
Standard Performance | Splice loss (typical) | SMF: 0.05dB, MMF:0.02dB, DSF: 0.08dB |
Splcie Time (typical) | 14 seconds | |
Heating Time (typical) | Approx 55 seconds |