90R Fusion Splicer Kit (CT-50 & RS03)

The Fujikura 90R is the mass fusion splicer workhorse of the splicing world. As data demand continues to rise, the solution to handle the increased traffic is to increase fiber counts. As a result, fiber counts being utilized in enterprise data centers, campus, and metro networks have grown enough to make single fiber splicing too costly and timely. High density cabling made possible by SpiderWeb Ribbon® (SWR) and others like it are spurring ribbon splicing activity in places that have traditionally used loose fiber. The 90R is the answer to these changes in splicing demand. With automated splice start, tube heater, wind protector, cleave tracking, and blade rotations for up to 2 cleavers at a time, this splicer frees up operator time for other fiber preparation steps. New to the 90R, you can keep your splicer in the field longer with field replaceable V-grooves. When V-grooves can no longer be cleaned after extended use, or are accidentally damaged, you can resume splicing in minutes by installing the spare set included with your 90R kit.
Reference:
90R_KIT1_NEW
Add to compare0
Description
Parameter Value
Fiber Alignment Method Self cladding alignment with melting surface tension
Maximum Fiber CountUp to 12 fiber ribbon
Applicable FiberFiber TypeSingle mode optical fiber
Multi mode optical fiber
Cladding Dia.Approx. 125µm
Applicable CoatingSheath ClampCoating shape : Refer to options
Cleave length : 10mm
Fiber Splice PerformanceSplice LossITU-T G.652 : Avg. 0.05dB
ITU-T G.651 : Avg. 0.02dB
ITU-T G.653 : Avg. 0.08dB
ITU-T G.655 : Avg. 0.08dB
ITU-T G.657 : Avg. 0.05dB
Splice LossSM FAST mode : Avg. 11 to 12 sec.
SM AUTO mode : Avg. 16 to 17 sec.
Applicable Protection SleeveSleeve TypeHeat-shrinkable sleeve
Sleeve LengthMax. 66mm
Sleeve Dia.Max. 6.0mm before shrinking
Sleeve Heat PerformanceHeat Time40mm FP-05 mode : Avg. 38 to 40 sec.
40mm FP-04T mode : Avg. 17 to 19 sec.
Single 40mm mode : Avg. 14 to 16 sec.
Single 60mm mode : Avg. 13 to 15 sec.
Fiber Tensile Test Force Approx. 2.0N
Electrode Life Approx. 1,500 splices
Physical DescriptionDimensions WApprox. 170mm without projection
Dimensions DApprox. 173mm without projection
Dimensions HApprox. 150mm without projection
WeightApprox. 2.6kg including battery
Environmental ConditionsTemperatureOperate : -10 to 50 degrees C
Storage : -40 to 80 degrees C
HumidityOperate : 0 to 95% RH non-condensing
Storage : 0 to 95% RH non-condensing
AltitudeMax. 3,700m
AC AdapterInputAC100 to 240 V, 50/60Hz, Max. 1.5A
Battery PackTypeRechargeable Lithium Ion
OutputApprox. DC14.4V/6,380mAh
CapacityApprox. 165 splice and heat cycles
TemperatureRecharge : 0 to 40 degrees C
Storage : -20 to 30 degrees C
Battery LifeApprox. 500 recharge cycles
DisplayLCD MonitorTFT 5 inches with touch screen
 MagnificationApprox. 20X : 12 ribbon to 60X : Single
IlluminationV-GroovesLED lamp
InterfacePCUSB2.0 Mini B type
External LED LampUSB2.0 A type, Approx. DC5V, 500mA
Ribbon StripperMini DIN 6 pin, DC12V, Max. 1A
WirelessBluetooth 4.1 LE
Data StorageSplice Mode100 splice modes
Heat Mode30 heat modes
Splice Result20,000 splices
Splice Image100 images
Screw Hole For Tripod 1/4-20 UNC
Other FeaturesAutomatic FunctionsSplice mode select by fiber type analysis
Discharge power calibration
Wind protector : open/close
Sheath clamp : open
Heater lid : open/close
Heater clamp : open/close
Reference GuideVideo and PDF file stored in splicer
ElectrodeReplaceable without tool
Product Details
90R_KIT1_NEW
Attachments
Reviews
No comments

Menu

Share