FIBERPRO PD2000 Fiber-Loop Optical-Microwave Phase Detector
FIBERPRO PD2000 Fiber-Loop Optical-Microwave Phase Detector (FLOM-PD) is a high-performance phase detection and synchronization system for optical signals and RF reference signals. Simbol Test Systems is an authorized Canadian distributor for FIBERPRO, providing sales and product support for Fiberpro photonic instruments and optical test equipment.
Download the FIBERPRO PD2000 Fiber-Loop Optical-Microwave Phase Detector (PDF)
FIBERPRO PD2000 Fiber-Loop Optical-Microwave Phase Detector (FLOM-PD)
The FIBERPRO PD2000 Fiber-Loop Optical-Microwave Phase Detector, also known as FLOM-PD, is a high-performance phase detection and synchronization system designed for precise timing comparison between optical pulse signals and RF reference signals. It supports stable synchronization in advanced optical, microwave, and photonic test environments.
The PD2000 is suitable for applications requiring ultra-sensitive timing jitter measurement, precise optical-to-RF synchronization, and RF signal synchronization to stabilized fiber links. With high detector sensitivity, sub-femtosecond resolution, ultra-low timing jitter, and wide locking bandwidth, it is designed for demanding research, laboratory, and advanced optical communication applications.
Simbol Test Systems is an authorized Canadian distributor for FIBERPRO, providing sales and product support for Fiberpro photonic instruments and optical test equipment. Contact us for PD2000 configuration support, application review, product information, and quotation assistance.
Key Features
- Fiber-loop optical-microwave phase detection system for optical and RF synchronization
- High detector sensitivity of 0.5 mV/fs
- Detector resolution below 0.1 fs
- Ultra-low timing jitter below 7 fs RMS over 12 hours
- Super-wide locking bandwidth greater than 2,000 kHz
- Bandwidth of error signal greater than 10 MHz
- Ultra-low SSB phase noise performance
- USB remote interface
- Control system and loop filter included
- PD2100 option available with integrated VCO configuration
Applications
- Ultrasensitive timing jitter measurement between ultrafast lasers and RF signals
- Precise synchronization between ultrafast lasers and RF signals
- RF signal synchronization to the output of stabilized fiber links
- Synchronization of external voltage-controlled oscillators
- Optical-microwave phase detection research
- Advanced photonic, RF, microwave, and ultrafast laser test systems
Technical Specifications
| Parameter | PD2000 | PD2100 |
|---|---|---|
| Product Type | Fiber-loop optical-microwave phase detector | Fiber-loop optical-microwave phase detector with VCO |
| Detector Sensitivity | 0.5 mV/fs | 0.5 mV/fs |
| Detector Resolution | < 0.10 fs | < 0.10 fs |
| Control System | Included | Included |
| Auto Lock | Included | Included |
| VCO | Not included | Included |
| Timing Jitter | < 7 fs RMS over 12 hours | < 7 fs RMS over 12 hours |
| Bandwidth of Error Signal | > 10 MHz | > 10 MHz |
| Locking Bandwidth | > 2,000 kHz | > 2,000 kHz |
| Output Impedance | 50 Ω | 50 Ω |
| VCO Frequency | None | 10 GHz |
| RF Output Power | None | 12 dBm |
| RF Connector | SMA | SMA |
| Error Signal Output Connector | SMA | SMA |
| Loop Filter | Included | Included |
| Power Supply | AC 100 to 240 V, 50/60 Hz | AC 100 to 240 V, 50/60 Hz |
| Dimensions with Rubber Cover | 234 mm x 410 mm x 108 mm | 234 mm x 410 mm x 108 mm |
| Dimensions without Rubber Cover | 212 mm x 380 mm x 86 mm | 212 mm x 380 mm x 86 mm |
Input Requirements
| Parameter | PD2000 | PD2100 |
|---|---|---|
| RF Input Power | > 12 dBm | None |
| Optical Input Wavelength | 1550 nm ± 40 nm | 1550 nm ± 40 nm |
| Optical Input Power | > 13 dBm | > 13 dBm |
| Optical Input Type | PM fiber | PM fiber |
| Pulse Repetition Rate | < 10 GHz | < 10 GHz |
Configuration Notes
| Item | Details |
|---|---|
| PD2100 Configuration | PD2100 is a PD2000 configuration with VCO included. |
| Detector Sensitivity Condition | Detector sensitivity is specified at 14 dBm optical input. |
| Auto Lock Note | Auto lock applies when an external RF source is used. |
| VCO Frequency Options | 10 GHz is specified for PD2100; other frequencies are available and should be specified when ordering. |
Sales and Product Support
Simbol Test Systems supports Canadian customers with FIBERPRO product selection, quotation assistance, and technical sales support. To request pricing or product information for the FIBERPRO PD2000 Fiber-Loop Optical-Microwave Phase Detector (FLOM-PD), contact us with your synchronization requirements, RF reference details, optical input conditions, and preferred configuration.