Click for more products.
No products were found.
FIBERPRO LS5000 Lightwave Synthesizer
FIBERPRO LS5000 Lightwave Synthesizer is a versatile incoherent optical light source offering single wavelength, comb, and super-flat broadband output modes for optical test and measurement applications. Simbol Test Systems is an authorized Canadian distributor for FIBERPRO, providing sales and product support for Fiberpro photonic instruments and optical test equipment.
Download the FIBERPRO LS5000 Lightwave Synthesizer (PDF)
Reference:
LS5000_WEB
Brand:
Add to compare0
FIBERPRO LS5000 Lightwave Synthesizer
The FIBERPRO LS5000 Lightwave Synthesizer is a versatile optical light source instrument designed for test, measurement, research, and manufacturing applications. It provides three different light output formats: single wavelength incoherent light, comb source output, and super-flat broadband light output.
The LS5000 allows users to control wavelength, bandwidth, and output power using the front-panel touchscreen. Its stable optical output and flexible operating modes make it suitable for optical component testing, wavelength-dependent measurement, production test systems, and general photonic laboratory use.
Simbol Test Systems is an authorized Canadian distributor for FIBERPRO, providing sales and product support for Fiberpro photonic instruments and optical test equipment. Contact us for LS5000 configuration support, connector selection, output power options, and quotation assistance.
Key Features
- Incoherent optical light source for test and measurement applications
- Three output modes: single wavelength, comb source, and super-flat broadband source
- High wavelength accuracy for optical measurement setups
- Maximum total output power option greater than 20 dBm in flat-top mode
- Single wavelength incoherent light output with 50 GHz and 100 GHz spacing options
- Comb source output on the ITU grid with 25 GHz, 50 GHz, and 100 GHz spacing options
- Super-flat broadband source with less than 0.5 dB spectral flatness
- Output power level control
- USB remote interface
- Simple touchscreen operation for laboratory and production environments
Applications
- Optical test and measurement systems
- Photonic component characterization
- Wavelength-dependent optical testing
- Comb source testing on ITU grid spacing
- C-band optical laboratory experiments
- Research and development test benches
- Manufacturing and production test systems
- Broadband optical source applications
Output Mode Specifications
| Parameter | Single Wavelength | Comb | Flat Top |
|---|---|---|---|
| Output Type | Single wavelength incoherent light output | Comb source output on ITU grid | Super-flat broadband source |
| Wavelength Range | 1527.60 nm to 1561.54 nm | 1527.60 nm to 1561.54 nm | 1527.60 nm to 1561.54 nm |
| Channel Spacing | 50 GHz or 100 GHz | 25 GHz, 50 GHz, or 100 GHz | Broadband flat-top output |
| Number of Channels | 96 channels at 50 GHz; 48 channels at 100 GHz | 192 channels at 25 GHz; 96 channels at 50 GHz; 48 channels at 100 GHz | Not specified |
| Frequency Stability | 1 GHz typical | 1 GHz typical | Not specified |
| SNR | > 40 dB | > 40 dB | Not specified |
| Spectral Flatness | Not specified | < 0.5 dB | |
| Maximum Ripple | Not specified | Not specified | ±1.0 dB |
| Output Power | Output power level control available > 20 dBm maximum option |
||
General Specifications
| Parameter | Value |
|---|---|
| Product Type | Lightwave synthesizer / incoherent optical light source |
| Model | LS5000 |
| Power Stability | 0.02 dB over 3 hours |
| Operating Temperature | 15°C to 40°C |
| Power Consumption | < 30 VA |
| Remote Interface | USB |
| Dimensions with Rubber Cover | 234 mm x 410 mm x 108 mm |
| Dimensions without Rubber Cover | 212 mm x 380 mm x 86 mm |
Ordering Code
The FIBERPRO LS5000 ordering code identifies the output power option for the flat-top source and the required connector type. The general ordering format is LS5000-(1)-(2).
| Ordering Code Element | Available Options | Description |
|---|---|---|
| Ordering Format | LS5000-(1)-(2) | Defines the flat-top source output power option and optical connector type. |
| Flat Top Output Power | 10 = > 10 dBm; 15 = > 15 dBm; 20 = > 20 dBm | Selects the required output power level for the flat-top source. |
| Connector Type Codes | F/P = FC/PC; F/A = FC/APC | Selects the required optical connector type. |
Sales and Product Support
Simbol Test Systems supports Canadian customers with FIBERPRO product selection, quotation assistance, and technical sales support. To request pricing or product information for the FIBERPRO LS5000 Lightwave Synthesizer, contact us with the required output mode, flat-top power option, connector type, and application details.