90S Fusion Splicer Kit (with Cleaver)

The 90S is the latest core alignment splicer from Fujikura. It’s designed to give you high quality splices and to stay in the field. The 90S kit solves common problems seen in the field today, from splicing poor quality legacy fiber to automated equipment maintenance and upkeep. The 90S can be utilized in any field splicing application seen today: bend-insensitive fibers in drop cables, long-haul terrestrial and submarine LEAF fibers, loose buffer fiber, splice on connectors, and the list goes on. The speed and accuracy of the 90S even make it suitable for certain production and specialty environments, where high output, tight packaging, and low loss requirements are needed. Regardless your scenario, the 90S is designed to keep you going with an extended battery life of 300 splice and heat cycles, and by alleviating the need for traditional operation tasks such as; frequent arc calibrations, cleaver blade rotations, cleaver usage tracking, and manual splicing operations with its multiple automated and ease-of-use features. A redesigned work tray, cooling tray, and optional cable clamp make the 90S kit more versatile than any of its predecessors in adapting to varying work conditions and environments. In addition, if you are splicing loose buffer fiber, there is no longer a need to purchase and swap out with an additional sheath clamp. Now, a universal sheath clamp that handles both loose and tight buffer fiber is standard.
Read more
New product
Add to compare0
Parameter Value
Fiber Count Can be Spliced Single fiber
Applicable FiberFiber TypeSingle mode optical fiber
Multi mode optical fiber
Cladding Dia.80 to 150µm
Applicable CoatingSheath ClampCoating dia. : Max. 3,000µm
Cleave length: 5 to 16mm
Fiber Splice performanceSplice LossITU-T G.652 : Avg. 0.02dB
ITU-T G.651 : Avg. 0.01dB
ITU-T G.653 : Avg. 0.04dB
ITU-T G.655 : Avg. 0.04dB
ITU-T G.657 : Avg. 0.02dB
Splice TimeSM FAST mode : Avg. 8 to 10 sec.
AUTO mode: Avg. 14 to 16 sec.
Applicable Protection SleeveSleeve TypeHeat-shrkinkable sleeve
Sleeve LengthMax. 66mm
Sleeve Dia.Max. 6.0mm before shrinking
Sleeve Heat PerformanceHeat Time60mm slim mode : Avg. 9 to 10 sec.
60mm mode : Avg. 13 to 15 sec.
Fiber Tensile Test ForceApprox. 2.0 N
Electrode LifeApprox. 5,000 splices
Physical DescriptionDimensions WApprox. 170 mm without projection
Dimensions DApprox. 173 mm without projection
Dimensions HApprox. 150 mm without projection
WeightApprox. 2.8 kg including battery
Environmental ConditionTemperatureOperate: -10 to 50 degrees C
Storage: -40 to 80 degrees C
HumidityOperate: 0 to 95% RH non-condensing
Storage: 0 to 95% RH non-condensing
AltitudeMax. 5,000m
AC AdapterInputAC100 to 240 V, 50/60 Hz, Max 1.5A
Battery PackTypeRechargeable Lithium Ion
OutputApprox. DC14.4V/6,380 mAh
CapacityApprox. 300 splice and heat cycles
TemperatureRecharge : 0 to 40 degrees C
Storage : -20 to 30 degrees C
Battery LifeApprox. 500 recharge cycles
DisplayLCD MonitorTFT 5 inches with touch screen
 Magnification200 to 320x
IlluminationV-GroovesLED lamp
InterfacePCUSB2.0 Mini B type
Ext. LED LampUSB2.0 A type, Approx. DC5V, 500 mA
Ribbon StripperMini DIN 6pin, DC12V, Max 1A
WirelessBluetooth 4.1 LE
Data StorageSplice Mode100 splice modes
Heat Mode30 heat modes
Splice Results20,000 splices
Splice Image100 images
Screw Hole for Tripod 1/4-20 UNC
Other FeaturesAutomatic FunctionsSplice mode select by fiber type analysis
Discharge power calibration
Wind protector : open/close
Sheath clamp : open
Heater lid: open/close
Heater clamp : open/close
Reference GuideVideo and PDF files stored in splicer
Sheath ClampEasy sleeve positioning clamp
ElectrodeReplaceable without tool
Read more
Product Details