Fujikura 90R Fusion Splicer (Without Bluetooth)

The Fujikura 90R is the mass fusion splicer workhorse of the splicing world. As data demand continues to rise, the solution to handle the increased traffic is to increase fiber counts. As a result, fiber counts being utilized in enterprise data centers, campus, and metro networks have grown enough to make single fiber splicing too costly and timely. High density cabling made possible by SpiderWeb Ribbon® (SWR) and others like it are spurring ribbon splicing activity in places that have traditionally used loose fiber. The 90R is the answer to these changes in splicing demand. With automated splice start, tube heater, wind protector, cleave tracking, and blade rotations for up to 2 cleavers at a time, this splicer frees up operator time for other fiber preparation steps. New to the 90R, you can keep your splicer in the field longer with field replaceable V-grooves. When V-grooves can no longer be cleaned after extended use, or are accidentally damaged, you can resume splicing in minutes by installing the spare set included with your 90R kit.

Download Fujikura 90R Fusion Splicer Specification SheetDownload Fujikura 90R Fusion Splicer Specification Sheet

Read moreShow less
Add to compare0

Fujikura 90R Fusion Splicer Specifications:

Parameter  Value
Fiber Alignment Method  Self cladding alignment with melting surface tension
Maximum Fiber Count Up to 12 fiber ribbon
Applicable Fiber Fiber Type Single mode optical fiber
Multi mode optical fiber
Cladding Dia. Approx. 125 µm
Applicable Coating Sheath Clamp Coating shape : Refer to options
Cleave length : 10mm
Fiber Splice Performance Splice Loss ITU-T G.652 : Avg. 0.05 dB
ITU-T G.651 : Avg. 0.02 dB
ITU-T G.653 : Avg. 0.08 dB
ITU-T G.655 : Avg. 0.08 dB
ITU-T G.657 : Avg. 0.05 dB
Splice Loss SM FAST mode : Avg. 11 to 12 sec.
SM AUTO mode : Avg. 16 to 17 sec.
Applicable Protection Sleeve Sleeve Type Heat-shrinkable sleeve
Sleeve Length Max. 66 mm
Sleeve Dia. Max. 6.0 mm before shrinking
Sleeve Heat Performance Heat Time 40mm FP-05 mode : Avg. 38 to 40 sec.
40mm FP-04T mode : Avg. 17 to 19 sec.
Single 40 mm mode : Avg. 14 to 16 sec.
Single 60 mm mode : Avg. 13 to 15 sec.
Fiber Tensile Test Force   Approx. 2.0N
Electrode Life   Approx. 1,500 splices
Physical Description Dimensions W Approx. 170 mm without projection
Dimensions D Approx. 173 mm without projection
Dimensions H Approx. 150 mm without projection
Weight Approx. 2.6 kg including battery
Environmental Conditions Temperature Operate : -10 to 50 °C
Storage : -40 to 80 °C
Humidity Operate : 0 to 95% RH non-condensing
Storage : 0 to 95% RH non-condensing
Altitude Max. 3,700 m
AC Adapter Input AC 100 to 240 V, 50/60 Hz, Max. 1.5 A
Battery Pack Type Rechargeable Lithium Ion
Output Approx. DC 14.4 V/6,380 mAh
Capacity Approx. 165 splice and heat cycles
Temperature Recharge : 0 to 40 °C
Storage : -20 to 30 °C
Battery Life Approx. 500 recharge cycles
Display LCD Monitor TFT 5 inches with touch screen
  Magnification Approx. 20X : 12 ribbon to 60X : Single
Illumination V-Grooves LED lamp
Interface PC USB2.0 Mini B type
External LED Lamp USB2.0 A type, Approx. DC 5 V, 500 mA
Ribbon Stripper Mini DIN 6 pin, DC 12 V, Max. 1 A
Wireless Bluetooth 4.1 LE
Data Storage Splice Mode 100 splice modes
Heat Mode 30 heat modes
Splice Result 20,000 splices
Splice Image 100 images
Screw Hole For Tripod   1/4-20 UNC
Other Features Automatic Functions Splice mode select by fiber type analysis
Discharge power calibration
Wind protector : open/close
Sheath clamp : open
Heater lid : open/close
Heater clamp : open/close
Reference Guide Video and PDF file stored in splicer
Electrode Replaceable without tool
Read moreShow less
Product Details