Click for more products.
No products were found.
Jonard Tools SPRI-1 SPARC Fusion Splicer, Ribbon Fiber
The SPARC core Alignment Fusion Splicer is an advanced Ribbon Fiber Fusion Splicer. It ensures impeccable fiber splicing precision, reliability, and efficiency. Engineered for fiber optic professionals, it combines rapid splicing times with cutting-edge features, offering a seamless and dependable splicing experience even in challenging environments.
- Splices fiber optic cables in as little as 15 seconds for ribbon fiber or 9 seconds for single fibers
- Pressure Heater Technology reduces heating time to only 20 seconds
- Versatile fiber holders to easily switch between different sizes of ribbon fibers
- Improved lighting for higher visibility in dark settings
- Intuitive full touch screen for enhanced user experience
- 9000 mAh battery provides up to 220 cycles (splicing and heating) on one charge
- Rugged design with water resistance (IPx2), shock resistance (drop tested from 30"), and dust resistance (IP5X)
- On-board memory stores up to 5,000 test results
Condition
New
Reference:
SPRI-1
Brand:
Add to compare0
The SPRI-1 is Jonard Tools’ flagship ribbon fiber fusion splicer—engineered for speed, precision, and rugged field performance. With this purchase, you're equipped with a full suite of tools and accessories to handle both ribbon and single fiber splicing with ease.
Core Components
- SPRI-1 SPARC Fusion Splicer – Core Alignment for ribbon and single fibers
- FSP-B9000 Ribbon Battery Pack – 9000 mAh, supports up to 330 cycles per charge
- FSP-ADP-65JH AC Adapter – Reliable power supply
- FSP-ADP-PC Power Cable – For direct connection
Essential Tools
- FCR-800 SPARC Blade Cleaver – One-step cleaving for ribbon fiber
- TFS-100 Thermal Stripper – For ribbon or simplex fiber
- JIC-375 Fiber Optic Stripper – Three-hole design
- JIC-186 Kevlar® Cutting Shears – Durable and sharp
- FDC-66 Disposal Can – Safe fiber scrap management
Cleaning & Maintenance
- CWP-125 Cotton Swabs – Pack of 125 for delicate cleaning
- FW-5 Fiber Wipes (Wet) – Pack of 5
- FSP-WCB Wire Cleaning Brush
- FSP-SBB Soft Bristle Brush
- FSP-FBB Firm Bristle Brush
Accessories & Holders
- FSP-SOC SOC Holder
- FSP-SOCSR SOC Heater Holder for Ribbon Fiber
- FSP-CTR Cooling Tray
- FSP-CCT Clip-On Cooling Tray
- FH-250/2 Magnetic Single Fiber Holder Set
- FH-12/2 Magnetic 12F Ribbon Cable Set
- FH-2250A/2 & FH-2250B/2 Magnetic Fiber Holder Sets
- FSP-SFH Splicing Fiber Holder (Pre-installed)
- FSP-RHH Ribbon Heater Fiber Holder (Pre-installed)
Storage & Transport
- H-2000 Carrying Case – Rugged and portable
- FSP-STP Shoulder Strap
- FSP-FT Fiber Tray & FSP-FTP Tray Strap
Connectivity & Spare Parts
- FSP-E50 Spare Electrodes – One extra set
- FSP-DC USB Data Cable – For splice data transfer
- FSP-SC & FC-SC Set Screws – For splicer and cleaver
This all-inclusive kit ensures you're ready for high-volume ribbon splicing and precision single fiber work—whether you're in the lab or out in the field
Jonard Tools SPRI-1 Specifications:
| Alignment Method |
Core Alignment |
|---|---|
| Number of Fibers |
Up to 12 |
| Applicable Fibers |
SM (ITU-T G.652& T G.657) / MM (ITU-T G.651) / DS (ITU- T G.653) / NZDS (ITU-T G.655) |
| Compatible Fiber |
Ribbon : 0.25~0.4 mm / Single: 250 μm & 900 μm |
| Cladding Diameter |
125 µm |
| Cleave Length |
10 - 13 mm |
| Typical Splice Loss |
SM: 0.01dB / MM: 0.01dB / OS: 0.03dB / NZDS: 0.03dB / G.657: 0.01db |
| Return Loss |
>>60 dB |
| Splice Time |
Quick Mode: Avg. 4 sec / SM Mode: Avg. 5 sec / Auto Mode: Avg. 7 sec |
| Splice Programs |
Max 100 modes |
| Automatic Calibration |
Automatic Arc Calibration by air pressure & temperature |
| Electrode Life Span |
1500 Arc Discharges |
| Heating Programs |
Max 32 modes |
| Heating Time |
Quick: 9s / Average: 13s |
| Protection Sleeve Length |
20 mm - 60 mm |
| Data Output |
USB-C |
| Splice Memory |
5,000 results |
| Battery Capacity |
9000mAh Battery Capacity / Typical 330 cycles (Splicing + Heating) |
| Power Supply |
AC Input 100 - 240V, DC Input 9 - 19V |
| Monitor |
5.0" Color LCD display, Full Touch Screen |
| Magnification |
x360, x520 |
| Pull Test |
1.96 - 2.25 N |
| Product Main Color | Black/Gold |
| Dimensions | 6.8" x 6.5" x 6.5" (17.27 cm x 16.51 cm x 16.51 cm) |
| Weight | 6 lb (2721.55 g) |
| UPC # | 810132438004 |