Fujikura FH-110 Series RFID Specialty Fiber Holders
Fujikura FH-110 Series RFID Specialty Fiber Holders by Fujikura are precision fiber holders designed for specialty fiber splicing, cleaving, and stripping workflows. Available in multiple sizes from 60 µm to 2000 µm, the FH-110 series supports accurate fiber positioning and RFID-based process control with compatible Fujikura specialty fiber tools. Available from Simbol Test Systems, an authorized Canadian distributor and service center for AFL and Fujikura products.
Fujikura FH-110 Series RFID Specialty Fiber Holders
The Fujikura FH-110 Series RFID Specialty Fiber Holders are precision fiber holding accessories designed for advanced specialty fiber preparation, cleaving, stripping, and fusion splicing workflows. Built for use with compatible Fujikura specialty fiber tools, the FH-110 series helps technicians and production users maintain accurate fiber positioning while reducing handling variation during demanding optical fiber processes.
The Fujikura FH-110 Series is especially useful in specialty fiber environments where fiber diameter, coating diameter, cladding geometry, and repeatable process control are critical. These holders are available in a wide range of model sizes, from FH-110-60 through FH-110-2000, supporting specialty fibers across a broad range of cladding and coating diameters.
Unlike basic fiber holders, the FH-110 series includes RFID-enabled identification on supported tools. This allows compatible Fujikura cleavers and strippers to recognize the holder and support automatic mode selection, process control, holder management, and user-defined holder naming through supported software workflows. This is valuable for laboratories, production teams, R&D environments, and specialty fiber operations where repeatability and traceability matter.
Precision Fiber Handling with the Fujikura FH-110 Series
The Fujikura FH-110 Series Fiber Holders are designed to help users handle specialty fibers with consistency and confidence. When working with non-standard fiber sizes, large-diameter fibers, polarization-maintaining fiber, rare-earth doped fiber, or other specialty fibers, correct fiber holding is essential for reliable preparation and accurate alignment.
- RFID-enabled holder identification: Supports automatic mode selection and holder management on compatible Fujikura specialty fiber tools.
- Wide model range: Available in holder sizes from 60 µm to 2000 µm for specialty fiber applications.
- Precision fiber positioning: Helps maintain consistent fiber placement during cleaving, stripping, and splicing workflows.
- Compatible specialty tools: Designed for use with selected Fujikura specialty cleavers, strippers, and fusion splicing systems.
- Process control support: Useful for production and laboratory environments where repeatability and correct tool setup are important.
- Application flexibility: Suitable for specialty fiber splicing, R&D, high-strength processing, fiber preparation, and advanced optical component work.
Advanced Features and Benefits of the Fujikura FH-110 Series Fiber Holders
The Fujikura FH-110 Series RFID Specialty Fiber Holders are intended for more demanding fiber preparation environments than standard telecom splicing accessories. Specialty fibers often require careful handling because small variations in positioning, stripping length, cleave quality, or clamping can affect the final process result. The FH-110 series helps support a controlled workflow by pairing precise holder geometry with RFID-enabled tool communication on compatible systems.
When used with compatible Fujikura specialty fiber cleavers such as the CT-110, CT-111, CT-114, CT-115, and CT-116, FH-110 holders help support accurate cleaving of specialty fibers across a wide diameter range. The FH-110 series is also referenced for use with compatible stripping tools such as the SS-110 Specialty Fiber Stripper and other specialty fiber preparation systems.
In supported workflows, RFID holder recognition can help reduce setup errors by allowing the tool or software environment to identify the holder and apply the appropriate process settings. This can be especially helpful in production environments where multiple fiber types are processed and operators need to change between fiber sizes or preparation recipes efficiently.
The FH-110 series is available in many model sizes to support different fiber diameters. Choosing the correct holder size is important for stable clamping and accurate fiber positioning. Customers should select the holder based on the specific fiber cladding diameter, coating diameter, tool compatibility, and required preparation process.
Why Buy Fujikura FH-110 Fiber Holders from Simbol Test Systems?
Simbol Test Systems supplies professional fiber optic tools, fusion splicing accessories, test equipment, and technical support for telecom, photonics, laboratory, R&D, manufacturing, and specialty fiber customers. Simbol Test Systems is an authorized Canadian distributor and service center for AFL and Fujikura products, supporting customers with product selection, calibration, repair, maintenance, and technical service.
Because the Fujikura FH-110 Series Fiber Holders are used in specialized applications, selecting the correct holder model and accessory combination is important. Simbol Test Systems can help customers review fiber diameter, coating diameter, compatible tool model, insert requirements, and application needs before ordering.
Fujikura FH-110 Series Fiber Holder Specifications
| Brand | Fujikura |
| Product Series | FH-110 Series |
| Product Type | RFID specialty fiber holders |
| Available Holder Range | FH-110-60 through FH-110-2000 |
| Supported Fiber Diameter Range | Designed for specialty fiber applications from approximately 60 µm to 2000 µm holder sizes, depending on model and tool compatibility |
| RFID Support | RFID-enabled for holder identification and compatible process control workflows |
| Typical Applications | Specialty fiber splicing, cleaving, stripping, R&D, production, laboratory fiber processing, and advanced optical component work |
| Compatible Tool Families | Selected Fujikura specialty fiber cleavers, strippers, and fusion splicing systems |
| Compatible Tool Examples | CT-110, CT-111, CT-114, CT-115, CT-116, SS-110, FSM-100M, and FSM-100P where applicable |
| Environmental Range | Operating temperature 0°C to 40°C; storage temperature -40°C to 80°C; 0 to 95% RH non-condensing |
| Supplier and Support | Simbol Test Systems |
Fujikura FH-110 Series Ordering Information
| Model | AFL No. | Description |
| FH-110-60 | S018215 | FH-110 series RFID specialty fiber holder, 60 µm model |
| FH-110-100 | S018216 | FH-110 series RFID specialty fiber holder, 100 µm model |
| FH-110-125 | S018217 | FH-110 series RFID specialty fiber holder, 125 µm model |
| FH-110-150 | S018218 | FH-110 series RFID specialty fiber holder, 150 µm model |
| FH-110-180 | S018219 | FH-110 series RFID specialty fiber holder, 180 µm model |
| FH-110-210 | S018220 | FH-110 series RFID specialty fiber holder, 210 µm model |
| FH-110-250 | S018221 | FH-110 series RFID specialty fiber holder, 250 µm model |
| FH-110-300 | S018222 | FH-110 series RFID specialty fiber holder, 300 µm model |
| FH-110-350 | S018223 | FH-110 series RFID specialty fiber holder, 350 µm model |
| FH-110-400 | S018224 | FH-110 series RFID specialty fiber holder, 400 µm model |
| FH-110-500 | S018225 | FH-110 series RFID specialty fiber holder, 500 µm model |
| FH-110-600 | S018226 | FH-110 series RFID specialty fiber holder, 600 µm model |
| FH-110-700 | S018227 | FH-110 series RFID specialty fiber holder, 700 µm model |
| FH-110-800 | S018228 | FH-110 series RFID specialty fiber holder, 800 µm model |
| FH-110-900 | S018229 | FH-110 series RFID specialty fiber holder, 900 µm model |
| FH-110-1000 | S018230 | FH-110 series RFID specialty fiber holder, 1000 µm model |
| FH-110-1100 | S018231 | FH-110 series RFID specialty fiber holder, 1100 µm model |
| FH-110-1200 | S018232 | FH-110 series RFID specialty fiber holder, 1200 µm model |
| FH-110-1300 | S018233 | FH-110 series RFID specialty fiber holder, 1300 µm model |
| FH-110-1400 | S018234 | FH-110 series RFID specialty fiber holder, 1400 µm model |
| FH-110-1500 | S018235 | FH-110 series RFID specialty fiber holder, 1500 µm model |
| FH-110-1600 | S018236 | FH-110 series RFID specialty fiber holder, 1600 µm model |
| FH-110-1700 | S018237 | FH-110 series RFID specialty fiber holder, 1700 µm model |
| FH-110-1800 | S018238 | FH-110 series RFID specialty fiber holder, 1800 µm model |
| FH-110-1900 | S018239 | FH-110 series RFID specialty fiber holder, 1900 µm model |
| FH-110-2000 | S018240 | FH-110 series RFID specialty fiber holder, 2000 µm model |
Compatible Fujikura Specialty Fiber Tools
| Tool / System | Application |
| FSM-100M | Specialty fusion splicing and glass processing applications |
| FSM-100P | Specialty fusion splicing and polarization-maintaining fiber applications |
| CT-110 | Specialty fiber cleaving |
| CT-111 | Specialty fiber cleaving, including angled cleaving applications where supported |
| CT-114 | Large-diameter and specialty fiber cleaving |
| CT-115 | Large-diameter and specialty fiber cleaving |
| CT-116 | Large-diameter and specialty fiber cleaving, including angled cleaving applications where supported |
| SS-110 | Specialty fiber thermal stripping |
| CT60 | Fiber cleaver compatibility with FH-110 series holders for selected applications |
Model Selection Guide
Select the Fujikura FH-110 Series Fiber Holder according to the fiber diameter, coating diameter, compatible Fujikura tool, insert requirement, and preparation process. For specialty fiber applications, the correct holder size helps improve stability, positioning, and repeatability during stripping, cleaving, or fusion splicing.
For best results, confirm the required FH-110 holder model before ordering. Specialty fiber applications may also require compatible inserts, adapter plates, shims, software setup, or tool-specific accessories depending on the selected Fujikura system.
Professional Support and Service
The Fujikura FH-110 Series RFID Specialty Fiber Holders are important accessories for customers working with specialty fibers, high-value optical components, R&D fiber processing, and production fiber preparation. Their wide model range and RFID-enabled workflow support make them useful for organizations that require precision, repeatability, and controlled setup procedures.
Contact Simbol Test Systems with your fiber diameter, coating diameter, Fujikura tool model, and application requirements to request availability, compatibility support, or ordering assistance for Fujikura FH-110 Series Fiber Holders.