Simbol Fusion Splicer V-Groove Cleaning Kit
The Simbol Fusion Splicer V-Groove Cleaning Kit provides brushes, precision swabs, a magnifier, LED penlight, manual dust pump and cleaning fluid for routine fusion splicer care. Designed to remove dust, fiber-coating debris, dirt and handling contamination from V-grooves and other accessible areas, this portable Simbol kit supports consistent fiber positioning and dependable splicer operation. All components are organized in a convenient Simbol tool bag.
Simbol Fusion Splicer V-Groove Cleaning Kit
The Simbol Fusion Splicer V-Groove Cleaning Kit provides fiber optic technicians with a complete and portable selection of tools for routine fusion splicer cleaning and preventive maintenance. The kit is designed to help remove dust, fiber-coating debris, dirt and contamination caused by regular handling from V-grooves and other accessible areas of compatible fusion splicers.
Clean V-grooves are important for accurate fiber positioning during the fusion splicing process. Small particles or pieces of fiber coating can prevent a prepared fiber from resting correctly in the V-groove, potentially affecting fiber alignment and interrupting normal splicer operation. Regular inspection and careful cleaning can help maintain stable fiber placement and consistent splicing performance.
The kit includes dedicated brushes, two types of cotton swabs, a 3x and 6x magnifier, an LED penlight, a manual dust pump and FCC2 cleaning fluid. All components are stored in a portable Simbol tool bag for convenient transportation and organization.
Product reference: SplicerCleanKit
Features and Benefits of the Simbol Fusion Splicer V-Groove Cleaning Kit
- Provides a complete selection of fusion splicer cleaning and inspection tools.
- Designed for routine cleaning of fusion splicer V-grooves.
- Helps remove dust, fiber-coating debris, dirt and handling contamination.
- Includes scrubber and sweeper brushes for different cleaning tasks.
- Includes standard and sharp cotton swabs for general and detailed cleaning.
- Provides 200 cotton swabs in total.
- Includes a magnifier with 3x and 6x magnification.
- Includes an LED penlight for illuminating small splicer components.
- Includes a manual dust pump for non-contact removal of loose particles.
- Includes FCC2 fiber optic cleaning fluid.
- Portable Simbol tool bag keeps the cleaning supplies organized.
- Replacement tools and refill supplies can be identified by their individual product references.
Simbol Fusion Splicer V-Groove Cleaning Kit Contents
| Quantity | Product Reference | Included Product | Primary Purpose |
|---|---|---|---|
| 1 | 283SC-2 | Scrubber Brush | Focused cleaning of compatible, accessible fusion splicer areas |
| 1 | 273S-3 | Sweeper Brush | Sweeping loose particles and debris from accessible surfaces |
| 1 | MAG3X6X | 3x and 6x Magnifier | Close visual inspection of V-grooves and small components |
| 1 | PENLIGHT | LED Penlight | Illuminating the fusion splicer work area during inspection |
| 1 | DUSTPUMP | Manual Dust Pump | Removing loose dust and debris without touching the surface |
| 1 | FCC2-00-0902 | FCC2 Cleaning Fluid | Cleaning compatible fiber optic and fusion splicer surfaces |
| 1 | BAG_SIMBOL | Simbol Tool Bag | Storage and transportation of the complete cleaning kit |
| 4 packages of 25 | CS-1 | Cotton Swabs | General cleaning of accessible fusion splicer areas |
| 4 packages of 25 | CottonSwabSHARP | Sharp Cotton Swabs | Detailed cleaning of narrow and difficult-to-reach areas |
Total swab quantity: The kit contains 100 CS-1 cotton swabs and 100 CottonSwabSHARP sharp cotton swabs, providing a combined total of 200 swabs.
Brushes for Fusion Splicer Maintenance
The cleaning kit includes one 283SC-2 Scrubber Brush and one 273S-3 Sweeper Brush. The sweeper brush can be used to move loose particles from accessible surfaces, while the scrubber brush provides more focused contact cleaning where permitted by the fusion splicer manufacturer.
Brushes must be used carefully around V-grooves, fiber clamps, electrodes, optical components and alignment mechanisms. These are precision components that may be damaged by excessive pressure or incorrect cleaning techniques. A contaminated, worn or damaged brush should be replaced rather than reused.
Standard and Sharp Cotton Swabs
The Simbol Fusion Splicer V-Groove Cleaning Kit contains four packages of 25 CS-1 Cotton Swabs and four packages of 25 CottonSwabSHARP Sharp Cotton Swabs. Standard swabs support general cleaning of accessible areas, while the sharp swabs provide a more focused tip for narrow locations and detailed maintenance.
Each swab should be used only once. Reusing a swab may transfer previously removed contamination back onto the fusion splicer. Every swab should be inspected before use to confirm that its cleaning tip is clean and undamaged.
Magnification and LED Illumination
Small coating fragments and dust particles can be difficult to identify without suitable lighting and magnification. The included MAG3X6X Magnifier provides 3x and 6x magnification for close inspection of V-grooves and surrounding areas.
The included PENLIGHT LED Flashlight provides directed illumination inside the fusion splicer work area. Together, these inspection tools help technicians locate contamination before cleaning and verify the condition of the equipment after maintenance.
Manual Dust Pump and FCC2 Cleaning Fluid
The DUSTPUMP Manual Dust Pump helps remove loose dust and coating particles without making direct contact with sensitive components. A manual dust pump is preferable to uncontrolled compressed shop air, which may contain moisture, oil or additional contamination and may apply excessive air pressure.
The kit also includes one bottle of FCC2-00-0902 Cleaning Fluid. When cleaning fluid is required, a small amount should be applied to an appropriate swab or cleaning implement. Cleaning fluid should never be poured or sprayed directly into a fusion splicer. Cleaned surfaces must be allowed to dry completely before fibers are loaded or the equipment is operated.
Recommended Fusion Splicer Cleaning Procedure
- Switch off the fusion splicer and follow the manufacturer's maintenance and safety instructions.
- Open the wind protector and illuminate the work area using the included LED penlight.
- Use the 3x or 6x magnifier to inspect the V-grooves and surrounding areas.
- Use the manual dust pump to remove loose dust and fiber-coating debris.
- Use the sweeper or scrubber brush only on surfaces approved by the equipment manufacturer.
- Use a clean standard or sharp cotton swab to remove remaining contamination.
- If necessary, apply a small amount of FCC2 cleaning fluid to the swab, not directly to the fusion splicer.
- Allow all cleaned surfaces to dry completely.
- Inspect the V-grooves again before loading fibers and returning the splicer to operation.
Applications
- Fusion splicer V-groove cleaning
- Removal of fiber-coating debris
- Removal of dust, dirt and handling contamination
- Cleaning accessible fiber clamps and positioning areas
- Close visual inspection using 3x and 6x magnification
- Routine fusion splicer preventive maintenance
- Field fiber optic installation and maintenance
- Fiber optic cable assembly production
- Laboratory and training applications
Simbol Fusion Splicer V-Groove Cleaning Kit Specifications
| Specification | Details |
|---|---|
| Brand | Simbol |
| Product Reference | SplicerCleanKit |
| Product Name | Fusion Splicer V-Groove Cleaning Kit |
| Product Category | Fusion Splicer Cleaning and Maintenance Kit |
| Primary Function | Cleaning and inspecting V-grooves and accessible fusion splicer areas |
| Contaminants Addressed | Dust, fiber-coating debris, dirt and handling contamination |
| Brushes Included | One scrubber brush and one sweeper brush |
| Inspection Tools | 3x and 6x magnifier and LED penlight |
| Dust Removal Tool | Manual dust pump |
| Cleaning Fluid | FCC2 cleaning fluid |
| Standard Cotton Swabs | 100 CS-1 cotton swabs |
| Sharp Cotton Swabs | 100 CottonSwabSHARP sharp cotton swabs |
| Total Swab Quantity | 200 swabs |
| Storage | Portable Simbol tool bag |
| Typical Use Environments | Field installation, laboratory, production, service and training facilities |
| Compatibility | For compatible fusion splicers; follow the equipment manufacturer's cleaning instructions |
Replacement and Refill Items
Individual tools and refill supplies can be ordered using the product references listed in the kit contents table. Contact Simbol Test Systems with the required product reference and quantity to request current availability.
Maintenance notice: Routine cleaning does not replace professional repair, calibration or mechanical realignment. If a fusion splicer continues to display alignment errors, unstable operation or inconsistent splice results after cleaning, the equipment may require professional technical evaluation.
The Simbol Fusion Splicer V-Groove Cleaning Kit provides a complete and organized solution for routine splicer care. Its combination of brushes, inspection tools, cleaning fluid, dust removal equipment and 200 precision swabs helps technicians maintain clean fiber-positioning areas in field, laboratory and production environments.