AFL Splice-on-Connector Tool-Kit for 900 µm Fiber Termination
The FuseConnect Installation Kit is uniquely designed to extend the capability of fiber holder based fusion splicers beyond standard fiber splicing to field terminated connector splicing. The kit provides all items necessary to configure a splicer for field splicing of AFL FuseConnect field terminated connectors. The installation kits come equipped with all components necessary to handle 900 µm, 2 mm, and 3 mm cable. FuseConnect is compatible not only with Fujikura's fusion splicers, but also with most other industry-available, fiber holder-based fusion splicing platforms.
Download AFL Splice-on-Connector Tool-Kit Specification Sheet PDF
AFL Splice-on-Connector Tool-Kit
The AFL Splice-on-Connector Tool-Kit is a professional fiber optic termination kit designed for 900 µm splice-on-connector applications. This all-in-one kit brings together the tools, cleaning supplies, preparation accessories, cleaving equipment, fiber holders, clamps, and fusion splicing technology needed to support reliable field terminations and fast fiber optic deployment work.
Built around the Fujikura 35S Fusion Splicer, the AFL Splice-on-Connector Tool-Kit is intended for technicians who need a compact, portable, and efficient solution for splice-on-connector termination. It is especially useful for FTTx installations, MDU drops, 5G small cell sites, MDF/IDF splices, rural fiber deployments, network restoration, and other field applications where professional termination quality and fast setup are important.
The kit is designed for 900 µm coating diameter splice-on-connector applications and can also be used for fiber-to-fiber splicing with coating diameters ranging from 160 µm to 3 mm when suitable holders and accessories are used. Its combination of simultaneous fiber preparation, cladding alignment fusion splicing, one-click cleaving, and professional cleaning supplies helps technicians complete field work more efficiently.
Complete Field Termination Solution with the AFL Splice-on-Connector Tool-Kit
The AFL Splice-on-Connector Tool-Kit helps simplify the field termination workflow by bringing key items together in one organized kit. Instead of sourcing each tool separately, technicians receive a complete solution with the splicer, cleaver, stripper, fiber holders, cleaning tools, transit case, accessories, and documentation support needed for splice-on-connector work.
- All-in-one SOC termination kit: Includes the Fujikura 35S Fusion Splicer, CT-16 Cleaver, SS-05 Dual Fiber Stripper, fiber holders, sheath clamps, cleaning tools, and preparation accessories.
- Designed for 900 µm splice-on-connector work: Supports field termination with AFL FUSEConnect splice-on connectors and related 900 µm applications.
- Simultaneous fiber preparation: Helps reduce preparation time and improve workflow efficiency during field splicing.
- Cladding alignment fusion splicing: The included Fujikura 35S uses active cladding alignment for single-fiber splicing.
- Compact and rugged field design: Suitable for field technicians working in FTTx, MDU, 5G, restoration, and access network environments.
- Professional cleaning supplies: Includes One-Click cleaners, wipes, swabs, and cleaning fluid for proper fiber and connector preparation.
- Organized transport case: Supplied with a transit case to keep tools and accessories organized for mobile field work.
Advanced Features and Benefits of the AFL Splice-on-Connector Tool-Kit
The AFL Splice-on-Connector Tool-Kit is designed to reduce fiber preparation time, improve field efficiency, and support consistent splice-on-connector termination. The included Fujikura 35S Fusion Splicer features automated functions such as sheath clamp control, wind protector automation, splice start, heater start, and easy sleeve positioning. These features help simplify the splicing process and reduce manual handling during field work.
The included CT-16 Fiber Cleaver supports one-click cleaver operation and is designed for durable, lightweight field use. Clean cleaves are essential for reliable fusion splicing, and the CT-16 helps technicians prepare fibers quickly and consistently. The kit also includes the SS-05 Dual Fiber Stripper, which supports preparation workflows for fiber stripping.
For connector and fiber cleaning, the kit includes professional cleaning accessories such as One-Click cleaners for LC and SC style connector needs, cotton swabs, AFL cleaning wipes, and fiber cleaning fluid. Proper cleaning is critical for splice-on-connector performance because contamination can affect insertion loss, reflectance, and long-term reliability.
The AFL Splice-on-Connector Tool-Kit is especially valuable for contractors, installers, service providers, utilities, and technicians who need a portable field termination solution. It supports applications such as field termination with splice-on connectors, 5G small cell sites, FTTx drops, MDU deployments, MDF/IDF terminations, and rural fiber restoration.
Why Buy the AFL Splice-on-Connector Tool-Kit from Simbol Test Systems?
Simbol Test Systems supplies professional fiber optic tools, fusion splicing accessories, test equipment, and technical support for telecom, broadband, data center, utility, and field installation customers. Simbol Test Systems is an authorized Canadian distributor and service center for AFL and Fujikura products, supporting customers with product selection, calibration, repair, maintenance, and technical service.
Because the AFL Splice-on-Connector Tool-Kit includes multiple tools, accessories, holders, clamps, cleaning supplies, and recommended FUSEConnect connector options, selecting the correct configuration and replacement accessories is important. Simbol Test Systems can help customers review tool-kit contents, compatible connectors, spare parts, service options, and field application requirements before purchase.
AFL Splice-on-Connector Tool-Kit Specifications
| Brand | AFL |
| Product Name | AFL Splice-on-Connector Tool-Kit |
| Product Type | Splice-on-connector termination and fusion splicing tool kit |
| Main Application | 900 µm splice-on-connector termination |
| Included Fusion Splicer | Fujikura 35S Fusion Splicer |
| Included Cleaver | CT-16 Fiber Cleaver |
| Included Stripper | SS-05 Dual Fiber Stripper |
| Fiber Alignment Method | Active cladding alignment |
| Fiber Count | Single fiber |
| Applicable Fiber Type | Single-mode and multimode optical fiber |
| Cladding Diameter | Approximately 125 µm |
| Applicable Coating Diameter | Up to 3,000 µm with sheath clamp; 160 µm to 3,000 µm based on available fiber holder options |
| Splicing Time | SM FAST mode: average 6 to 7 seconds; SM AUTO mode: average 8 to 10 seconds |
| Protection Sleeve Type | Heat-shrinkable sleeve |
| Maximum Sleeve Length | 66 mm |
| Maximum Sleeve Diameter | 6.0 mm before shrinking |
| Electrode Life | Approximately 6,000 splices |
| Splicer Display | 4.95 inch TFT LCD touchscreen |
| Splicer Weight | Approximately 1.4 kg including battery |
| Operating Temperature | -10°C to 50°C |
| Storage Temperature | -40°C to 80°C |
| Supplier and Support | Simbol Test Systems |
AFL Splice-on-Connector Tool-Kit Ordering Information
| Description | AFL No. |
| AFL Splice-on-Connector Tool-Kit including Fujikura 35S Fusion Splicer, CT-16 Cleaver, SS-05 Dual Fiber Stripper, FH-70-250 and FH-70-900 fiber holders, SP-04 set plates, spare electrodes, AC adapter, battery pack, power cord, USB cable, CC-44 transit case, cleaning supplies, preparation accessories, FH-FC-900 fiber holder, mechanical splicer holder, loose tube sheath clamps, warranty, and instruction manual | S018513 |
| One Year Extended Warranty for 35S Splicer only | S012996 |
| Two Year Extended Warranty for 35S Splicer only | S013000 |
Included Tool-Kit Components
| Component Category | Included Items |
| Fusion Splicing | Fujikura 35S Fusion Splicer, spare electrodes, battery pack, AC adapter, power cord, USB cable, and instruction manual |
| Cleaving and Stripping | CT-16 Fiber Cleaver and SS-05 Dual Fiber Stripper |
| Fiber Holders and Clamps | FH-70-250 fiber holders, FH-70-900 fiber holders, FH-FC-900 fiber holder, mechanical splicer holder, loose tube sheath clamps, and SP-04 set plates |
| Cleaning Supplies | Cotton swabs, One-Click Cleaner LC, One-Click Cleaner SC, AFL cleaning wipes, and fiber cleaning fluid |
| Preparation Accessories | Kevlar shears and related field preparation accessories |
| Transport and Storage | CC-44 transit case |
Applications
| Application | Typical Use |
| Splice-on-Connector Field Termination | Field installation of AFL FUSEConnect splice-on connectors |
| 5G Small Cell Sites | Fiber termination and restoration work for compact access network deployments |
| FTTx and MDU Drops | Fiber drops, access terminals, building entries, and customer premises terminations |
| MDF / IDF Splicing | Fiber splices and terminations in network rooms, enterprise spaces, and distribution frames |
| Rural Fiber Deployment and Restoration | Portable field kit for fiber repair, restoration, and low-to-mid fiber count splicing |
Recommended FUSEConnect Splice-On Connectors
| Connector Type | Boot Type | UPC Single-mode | APC Single-mode | PC 62.5 µm Multimode | PC 50 µm LOMMF |
|---|---|---|---|---|---|
| SC | 900 µm | FUSE-SC9SMU-6 | FUSE-SC9SMA-6 | FUSE-SC9M62-6 | FUSE-SC9M50L-6 |
| LC | 900 µm | FUSE-LC9SMU-6 | FUSE-LC9SMA-6 | FUSE-LC9M62-6 | FUSE-LC9M50L-6 |
| ST | 900 µm | FUSE-ST9SMU-6 | Not applicable | FUSE-ST9M62-6 | FUSE-ST9M50L-6 |
Replacement Parts and Accessories
| Description | AFL No. |
| Fujikura 35S Fusion Splicer Standard Kit | S018314 |
| CT-16 Fiber Cleaver | S018330 |
| SS-05 Dual Fiber Stripper | S018327 |
| FH-70-250 Fiber Holders for 250 µm single fiber | S017111 |
| FH-70-900 Fiber Holders for 900 µm single fiber | S017113 |
| FH-FC-900 Fiber Holder for 0.9 mm cable | S014697 |
| CLAMP-S35B Loose Buffer Tube Clamp | S018333 |
| BTR-17 Battery Pack | S018324 |
| ADC-21 AC Adapter | S018168 |
| ACC-09 Power Cord | S014390 |
| ELCT2-16B Electrodes | S017103 |
| CC-44 Transit Case | S018325 |
| CB-09 Replacement Blade for CT-16 Cleaver | S018335 |
| One-Click Cleaner MU/LC | 8500-05-0002MZ |
| One-Click Cleaner SC/ST/FC | 8500-05-0001MZ |
Professional Support and Availability
The AFL Splice-on-Connector Tool-Kit is a practical choice for field technicians, contractors, broadband installers, telecom service teams, and network restoration crews that require a complete splice-on-connector termination solution. It combines fusion splicing, cleaving, stripping, cleaning, preparation, and connector support in one field-ready package.
Contact Simbol Test Systems for availability, configuration support, compatible FUSEConnect connectors, replacement parts, calibration, repair, service, or assistance selecting the right AFL Splice-on-Connector Tool-Kit accessories for your fiber optic termination workflow.