Fujikura RS Series Thermal Strippers for Optical Fibers
Fujikura RS Series Thermal Strippers by Fujikura provide fast, ergonomic stripping performance for single-fiber and multi-fiber optical fiber preparation. The RS01, RS02, RS03, and RS03-80 models offer 3-second heating, low pulling force, 200 µm coated fiber and ribbon stripping capability, and support for compatible Fujikura FH-series fiber holders. Available from Simbol Test Systems, an authorized Canadian distributor and service center for AFL and Fujikura products.
Download the Fujikura RS Series Thermal Strippers Specification Sheet (PDF)
Fujikura RS Series Thermal Strippers
The Fujikura RS Series Thermal Strippers are professional optical fiber preparation tools designed for fast, clean, and consistent coating removal before fusion splicing. The series includes the RS01, RS02, RS03, and RS03-80 thermal stripper models, supporting a range of single-fiber and multi-fiber stripping applications.
Designed for technicians working in field, laboratory, production, and high fiber count environments, the Fujikura RS Series combines fast heating, low pulling force, ergonomic handling, and compatibility with Fujikura field and factory style fiber holders. These features help improve fiber preparation consistency while reducing operator effort during repeated stripping tasks.
The RS Series supports stripping of 200 µm coated fibers and ribbons, making it useful for modern high-density fiber applications. An audible beep and illuminated LED indicate when the correct heating temperature has been reached, while a temperature selection switch allows field optimization for different fiber types or operating conditions.
Fast and Reliable Fiber Stripping with the Fujikura RS Series
The Fujikura RS Series Thermal Strippers are designed to simplify fiber coating removal while improving productivity. With a typical heating time of approximately 3 seconds, the RS Series helps reduce waiting time during fiber preparation and supports efficient workflows for fusion splicing and ribbon fiber processing.
- Fast 3-second heating: Helps speed up fiber preparation and improves productivity during repeated stripping work.
- Low pulling force: Designed to reduce operator effort and improve comfort during high fiber count applications.
- Single and multi-fiber support: RS01, RS02, and RS03 models support 1 to 16 fibers depending on the application.
- 200 µm coated fiber capability: Suitable for stripping 200 µm coated fibers and ribbon fiber structures.
- Bluetooth-enabled models: RS02, RS03, and RS03-80 support wireless connection with compatible Android and iOS devices.
- Battery operation: RS03 and RS03-80 models include a rechargeable battery for approximately 600 stripping cycles in Eco mode.
- Fiber holder compatibility: Accepts compatible FH-40, FH-50, FH-60, FH-70, and FH-100 series fiber holders.
Advanced Features and Benefits of the Fujikura RS Series Thermal Strippers
The Fujikura RS Series is built for users who require repeatable stripping performance with minimal fiber stress. The thermal stripping method softens the coating before removal, reducing the force needed to strip the fiber and helping support clean preparation before cleaving and fusion splicing.
The RS01 model provides the core thermal stripping functionality without Bluetooth, making it suitable for environments where wireless devices are not permitted. The RS02 adds Bluetooth capability for convenient programming and user preference setup through a compatible smartphone app.
The RS03 adds battery-powered operation, making it especially useful for mobile field work and locations where AC power access is limited. With its high-capacity rechargeable lithium-ion battery, the RS03 supports approximately 600 strips in Eco mode. The RS03-80 is designed for 80 µm cladding fiber applications, supporting specialized fiber preparation needs.
For production, installation, repair, and specialty fiber environments, the RS Series helps technicians maintain a controlled stripping process. The combination of LED and audible heat-ready indicators, adjustable temperature selection, ergonomic handling, and low pulling force makes the series practical for demanding fiber preparation workflows.
Why Buy Fujikura RS Series Thermal Strippers from Simbol Test Systems?
Simbol Test Systems supplies professional fiber optic tools, fusion splicing accessories, test equipment, and technical support for telecom, broadband, data center, utility, laboratory, and production customers. Simbol Test Systems is an authorized Canadian distributor and service center for AFL and Fujikura products, supporting customers with product selection, calibration, repair, maintenance, and technical service.
Because the Fujikura RS Series Thermal Strippers are used with different fiber holders, fiber sizes, and application requirements, selecting the correct model and accessories is important. Simbol Test Systems can help customers choose the right RS thermal stripper, power supply, battery, spacer, and compatible fiber holder setup for their workflow.
Fujikura RS Series Thermal Strippers Specifications
| Brand | Fujikura |
| Product Series | RS Series Thermal Strippers |
| Available Models | RS01, RS02, RS03, RS03-80 |
| Product Type | Thermal optical fiber coating strippers |
| Applicable Optical Fiber | Glass optical fibers and capillary |
| Fiber Count | RS01, RS02, RS03: 1 to 16 fibers; RS03-80: single fiber |
| Cladding Diameter | RS01, RS02, RS03: 125 µm; RS03-80: 80 µm |
| Coating Diameter | RS01, RS02, RS03: 200 to 400 µm; RS03-80: 150 to 250 µm |
| Stripping Length | Up to 35 mm |
| Typical Heating Time | 3 seconds; 5 seconds in Eco mode |
| Heating Temperature | 85°C to 140°C |
| Compatible Fiber Holders | All FH-40, FH-50, FH-60, FH-70, and FH-100 series fiber holders except FH-50-250 and FH-50-900 |
| Wireless Connectivity | RS01: not applicable; RS02, RS03, RS03-80: Bluetooth 4.1 LE |
| Operating Conditions | -10°C to 50°C, 0 to 95% RH, non-condensing |
| Storage Conditions | -20°C to 60°C, 0 to 95% RH, non-condensing |
| Supplier and Support | Simbol Test Systems |
Fujikura RS Series Model Comparison
| Model | Main Description | Wireless Connectivity | Battery Operation |
| RS01 | Thermal stripper with RS02-style core features but without Bluetooth technology | Not applicable | External power supply |
| RS02 | Thermal stripper with Bluetooth capability for user preference programming | Bluetooth 4.1 LE | External power supply |
| RS03 | Battery-powered thermal stripper with Bluetooth capability | Bluetooth 4.1 LE | Approx. 600 strips with Eco mode |
| RS03-80 | Battery-powered thermal stripper for 80 µm cladding fiber applications | Bluetooth 4.1 LE | Approx. 600 strips with Eco mode |
Fujikura RS Series Ordering Information
| Description | AFL No. |
| RS01 Thermal Stripper including RS01 Thermal Stripper, DCC-11, and instruction manual | S016815 |
| RS02 Thermal Stripper including RS02 Thermal Stripper, DCC-11, HEX-01 Hex Wrench, BRS-02 Brush, and instruction manual | S016816 |
| RS03 Thermal Stripper including RS03 Thermal Stripper, BTR-12 Battery Pack, ADC-09A AC Adapter, ACC-09 AC Power Cord, HEX-01 Hex Wrench, BRS-02 Brush, and instruction manual | S016817 |
| RS03-80 Thermal Stripper including RS03-80 Thermal Stripper, BTR-12 Battery Pack, ADC-09A AC Adapter, ACC-09 AC Power Cord, HEX-01 Hex Wrench, BRS-02 Brush, and instruction manual | S016842 |
Power Supply and Accessories
| Description | AFL No. |
| ADC-09A AC Adapter for RS01, RS02, and RS03 thermal strippers | S016820 |
| ACC-09 Power Cord | S014390 |
| BTR-12 Battery for RS03 | S016832 |
| SPA-RS02-08 Spacer | S016818 |
Professional Applications
The Fujikura RS Series Thermal Strippers are suitable for fiber preparation before fusion splicing in telecom, broadband, data center, laboratory, production, and specialty fiber environments. Their support for single-fiber, ribbon-fiber, 200 µm coated fiber, and 80 µm cladding fiber applications makes the RS Series a flexible solution for many fiber optic workflows.
Technicians can use the RS Series for high fiber count preparation, ribbon fiber stripping, field splicing preparation, factory-style fiber holder workflows, and specialty optical fiber applications where controlled heating and low stripping force are important.
Professional Support and Availability
Contact Simbol Test Systems with your fiber type, coating diameter, cladding diameter, fiber holder series, and application requirements to request availability, model selection support, replacement parts, or service assistance for Fujikura RS Series Thermal Strippers.