US Conec 15360 Disposable 16F Fiber Ribbonizer, Bag of 50
The US Conec 15360 Disposable 16F Fiber Ribbonizer uses quick-cure cyanoacrylate adhesive to create a robust 1x16 fiber ribbon for mass fusion splicing and multi-fiber connector termination. Its compact design supports ribbonization in confined spaces and applications involving extensive handling or multi-row termination. Each US Conec ribbonizer may be reused 10 or more times when serviceable. Supplied in a bag of 50 green ribbonizing tools.
US Conec 15360 Disposable 16-Fiber Ribbonizer, Bag of 50
The US Conec 15360 Disposable 16-Fiber Ribbonizer is a compact fiber preparation tool for arranging individual loose fibers into a controlled 1x16 ribbon. It uses quick-cure cyanoacrylate adhesive to produce a low-cost, robust fiber ribbon for mass fusion splicing, multi-fiber connector termination and other procedures requiring an organized 16-fiber configuration.
Loose fibers can be challenging to align and manage during multi-fiber preparation. The US Conec 15360 helps technicians convert 16 individual fibers into a short adhesive-based ribbon that can be handled as a single organized group. The resulting ribbon can be prepared for insertion into a compatible MT ferrule as part of an approved termination process.
The compact tool can be used in confined spaces and is well suited to applications involving extensive fiber handling or multi-row termination. Although categorized as disposable, each ribbonizer can support 10 or more uses when it remains clean and serviceable. The US Conec 15360 is supplied in a bag of 50 green ribbonizing tools.
Features and Benefits of the US Conec 15360 Disposable 16-Fiber Ribbonizer
- Creates an adhesive-based ribbon from 16 individual loose fibers.
- Produces a controlled 1x16 fiber ribbon configuration.
- Allows ribbonization in confined working spaces.
- Uses quick-cure cyanoacrylate adhesive for efficient preparation.
- Provides a low-cost alternative to a permanent ribbonizing fixture.
- Creates a robust ribbon for demanding cable preparation procedures.
- Ideal for applications involving extensive fiber handling.
- Supports multi-row connector termination workflows.
- Suitable for mass fusion splicing preparation.
- Supports preparation for insertion into compatible MT ferrules.
- Can provide 10 or more uses when clean and serviceable.
- Supplied as 50 ribbonizers per bag.
Quick-Cure Adhesive Ribbonization
The US Conec 15360 uses quick-cure cyanoacrylate adhesive to hold the aligned fibers together. This adhesive-based method allows technicians to create a short, stable ribbon without using a large ribbon-forming fixture. Once the fibers are positioned correctly, the adhesive secures the group in the required 16-fiber arrangement for subsequent processing.
Careful adhesive application is important. Users should follow the applicable US Conec procedure and observe the adhesive manufacturer's handling instructions. Excess adhesive should be avoided because it may interfere with subsequent stripping, cleaning, cleaving, splicing or connector termination steps.
Before further processing, the prepared ribbon should be inspected to confirm proper fiber order, alignment and adhesive coverage. The technician should also verify that the completed ribbon is compatible with the selected preparation tools and termination components.
Robust Ribbon for Extensive Handling
The adhesive-based ribbon created by the US Conec 15360 is intended to remain organized through demanding cable preparation processes. This makes the ribbonizer particularly useful when the fiber group must pass through several handling and preparation stages before final termination or splicing.
Maintaining the fibers as an ordered ribbon can simplify their movement between preparation steps. It can also help preserve fiber sequence during multi-row termination activities. The completed ribbon can be stripped and prepared for insertion into a compatible MT ferrule when the correct termination process and equipment are used.
Ribbonization in Confined Spaces
Fiber preparation is frequently performed near cable assemblies, inside cabinets or in other areas where working space is restricted. The compact design of the US Conec 15360 enables technicians to arrange loose fibers without requiring a large bench-mounted ribbonizing system.
This capability is valuable for field installation and cable assembly work where fibers must be organized close to the termination or splicing location. The lightweight disposable format also makes it practical to include ribbonizers in field kits and production workstations.
Mass Fusion Splicing Preparation
Mass fusion splicing allows multiple aligned fibers to be spliced during one operating cycle when compatible ribbon fibers, preparation equipment and fusion splicers are used. The US Conec 15360 creates a 16-fiber ribbon that can support this type of workflow.
Following ribbonization, the fiber group may require coating removal, cleaning and precision cleaving. Users should confirm that the prepared 16-fiber ribbon is compatible with the intended thermal stripper, ribbon cleaver, mass fusion splicer and splice protection system. The operating procedures supplied with each preparation tool should be followed.
Multi-Fiber and Multi-Row Connector Termination
The US Conec 15360 is designed for applications that include multi-fiber connector and multi-row termination. Converting loose fibers into a short 16-fiber ribbon helps organize the fiber group for insertion into compatible MT ferrules during the termination process.
Compatibility depends on the ferrule design, fiber dimensions, pitch and termination procedure. The standard US Conec 15360 should not be confused with specialized ribbonizers designed for reduced-diameter fibers or alternative fiber pitches. Customers working with 200 µm or 165 µm coated fibers should verify the required ribbonizer part number before ordering.
Reusable Disposable Design
Although the US Conec 15360 is classified as a disposable tool, it can provide 10 or more uses under appropriate conditions. Before each reuse, the ribbonizer should be checked for residual adhesive, contamination, physical damage or wear that could interfere with fiber alignment.
A ribbonizer that cannot hold the fibers in the correct position should be replaced. The 50-piece package provides a convenient supply for production facilities, field installation teams, laboratories and organizations performing recurring multi-fiber preparation.
US Conec 15360 Applications
- Mass fusion splicing preparation
- Multi-fiber connector termination
- Multi-row termination applications
- Preparation of loose fibers for compatible MT ferrules
- Fiber ribbonization in confined spaces
- Applications requiring extensive fiber handling
- Fiber optic cable assembly production
- Laboratory fiber preparation
- Field installation and termination work
US Conec 15360 Disposable 16-Fiber Ribbonizer Specifications
| Specification | Details |
|---|---|
| Manufacturer | US Conec |
| Part Number | 15360 |
| Product Name | Disposable Ribbonizer, 16F |
| Product Family | MT, PRIZM® MT |
| Category | Fiber Preparation Tool |
| Function | Ribbonizing |
| Style | Disposable, limited reuse |
| Fiber Count | 1x16 fibers |
| Ribbonization Method | Quick-cure cyanoacrylate adhesive |
| Stated Reuse | 10 or more uses when serviceable |
| Tool Colour | Green |
| Package Quantity | 50 ribbonizers per bag |
| Ordering Quantity | Sold in multiples of 50 |
| Primary Applications | Mass fusion splicing and multi-fiber connector termination |
The US Conec 15360 Disposable 16-Fiber Ribbonizer offers an efficient way to convert loose fibers into a robust 1x16 ribbon. Its quick-cure adhesive process, compact format, limited-reuse capability and 50-piece package make it a practical fiber preparation solution for professional splicing and termination workflows.