APM-102 Auto Prep Machine for 250/125um
The APM-101 and APM-102 provide fiber optic preparation automation for assembly operations in a factory environment. Both perform all the operational steps required to strip, clean and cleave the fiber, automatically and with high repeatability. This includes stripping the fiber without degrading fiber quality, cleaning fiber with alcohol to remove coating residue, and cleaving consistently at a right angle to the fiber axis. The entire process is complete in as little as 21 seconds. The APM-102 is designed to accept the FH-60-250 fiber holder used with Fujikura models 70S, 19S and 12S.
Condition
New
Reference:
APM-102_NEW
Brand:
Add to compare0
Specifications
Parameter |
Value |
| Applicable fiber | Silica based Single-mode and Multimode glass fiber |
| Applicable cladding diameter | 125 µm |
| Applicable coating | UV curable resin coating |
| Applicable coating diameter | 250 µm |
| Fiber clamping | FH-100-XXX series or FH-40-XXX fiber holder |
| Cleave length | 3 to 9 mm |
| Cleave angle | Typical 0.5° |
| Operating Time | Typical 18 seconds (in the cae of 125 µm diameter fiber with 250 µm coating |
| Daily maintenance | Typically every 150 cycles |
| Operation action | 1 step (Press start button only) |
| Air pressure | 4 bar |
| Operating Condition | 0 to 40°C at 0 to 95% RH (non-dew) |
| Storage condition | -40 to 80°C at 0 to 95% RH (non-dew) |
| Dimensions | 170W x 260D x 120H (mm) |
| Weight | 5.0 kg |