Fujikura APM-101 Fiber Preparation Tool

The APM-101 and APM-102 provide fiber optic preparation automation for assembly operations in a factory environment. Both perform all the operational steps required to strip, clean and cleave the fiber, automatically and with high repeatability. This includes stripping the fiber without degrading fiber quality, cleaning fiber with alcohol to remove coating residue, and cleaving consistently at a right angle to the fiber axis. The entire process is complete in as little as 21 seconds.

The APM-101 is designed to accept the FH-100-250 fiber holder that is a component of Fujikura’s FSM-100 series and LZM-100 splicing platforms. It can also accept the FH-40/45-250 fiber holder used with the FSM-40/45F and FSM-40/45PM splicing platforms. The APM-102 is designed to accept the FH-60-250 fiber holder used with Fujikura models 70S, 19S and 12S.

Read moreShow less
Condition
New
Reference:
APM-101
Brand:
Add to compare0
Description

Specifications

Parameter

Value

Applicable fiber Silica based Single-mode and Multimode glass fiber
Applicable cladding diameter 125 µm
Applicable coating UV curable resin coating
Applicable coating diameter 250 µm
Fiber clamping FH-100-XXX series or FH-40-XXX fiber holder
Cleave length 3 to 9 mm
Cleave angle Typical 0.5°
Operating Time Typical 18 seconds (in the cae of 125 µm diameter fiber with 250 µm coating
Daily maintenance Typically every 150 cycles
Operation action 1 step (Press start button only)
Air pressure 4 bar
Operating Condition 0 to 40°C at 0 to 95% RH (non-dew)
Storage condition -40 to 80°C at 0 to 95% RH (non-dew)
Dimensions 170W x 260D x 120H (mm)
Weight 5.0 kg
Read moreShow less
Product Details
APM-101

Menu

Share