US Conec 15639 IBC Brand OptiTip II Cleaner Kit
The US Conec 15639 IBC™ Brand OptiTip® II Cleaner Kit is a disposable push-style cleaner for OptiTip® connectors with MT ferrules. It cleans unmated cable assemblies and in-situ connectors located behind panels. The anti-static, non-fraying cleaning material helps remove contamination while minimizing contaminant attraction. Simple push-to-clean operation and more than 525 cleaning engagements make this US Conec kit suitable for cable assembly factories, field installations and fiber optic network maintenance.
US Conec 15639 IBC™ Brand OptiTip® II Cleaner Kit
The US Conec 15639 IBC™ Brand OptiTip® II Cleaner Kit is a disposable, push-style fiber optic cleaning tool designed for OptiTip® connectors with MT ferrules. It provides a practical solution for cleaning both unmated cable assemblies and in-situ connectors installed behind a panel.
Clean connector end faces are essential for maintaining dependable fiber optic network performance. Dust, oils and other contamination can affect optical transmission and may be transferred between connector surfaces during mating. The OptiTip® II Cleaner Kit allows technicians to clean compatible connector end faces using a simple push-to-clean action, helping support established inspect-clean-inspect procedures.
Each cleaner provides more than 525 cleaning engagements. Its anti-static system helps produce a clean connector end face while minimizing the attraction of additional contamination. The non-fraying cleaning material supports controlled cleaning without leaving loose cloth fibers around the ferrule or connector interface.
Features and Benefits of the US Conec 15639 OptiTip® II Cleaner Kit
- Designed specifically for OptiTip® fiber optic connectors.
- Compatible with MT ferrule configurations.
- Provides more than 525 cleaning engagements per cleaner.
- Simple push-to-clean operation for efficient connector maintenance.
- Cleans unmated cable assemblies held in the technician's hand.
- Cleans in-situ connectors and cable assemblies located behind panels.
- Anti-static cleaning system minimizes contaminant attraction.
- Non-fraying cleaning material supports clean, controlled operation.
- Disposable design eliminates refill installation and maintenance.
- Suitable for factory production, field installation and network maintenance.
Simple Push-to-Clean Operation
The US Conec 15639 uses a push-style cleaning mechanism to simplify routine fiber connector maintenance. The technician positions the cleaner correctly against the compatible connector interface and pushes the tool forward to complete the cleaning action. This straightforward process supports repeatable cleaning in production and field environments.
Because no replacement reel or cleaning cartridge is required, the disposable design reduces preparation between cleaning tasks. Once the available cleaning engagements have been consumed, the cleaner can be replaced with a new unit. Users should follow the applicable US Conec operating instructions to ensure correct cleaner alignment and handling.
Cleaning Unmated and In-Situ OptiTip® Connectors
The OptiTip® II Cleaner Kit is suitable for cleaning cable assemblies before mating. This allows technicians to clean and inspect the connector end face as part of cable assembly production, installation, testing or maintenance procedures.
The cleaner can also reach connectors installed behind a panel. This in-situ cleaning capability is valuable when a connector cannot be conveniently removed from its installed position. Supporting both unmated and behind-panel cleaning helps reduce the number of separate tools needed for compatible OptiTip® connector maintenance.
Anti-Static and Non-Fraying Cleaning System
Static can contribute to the attraction of airborne particles after a connector has been cleaned. The anti-static system in the US Conec 15639 helps minimize contaminant attraction, supporting a cleaner connector surface following maintenance.
The non-fraying cloth design helps prevent cleaning material from separating during use. This is important around multi-fiber connector interfaces, where loose fibers or debris could interfere with the cleaning result. Together, the anti-static system and non-fraying material provide a controlled cleaning process for compatible MT ferrule surfaces.
More Than 525 Cleaning Engagements
Each US Conec 15639 cleaner provides more than 525 cleaning engagements. This capacity makes the cleaner suitable for cable assembly factories, installation teams and maintenance technicians who regularly work with OptiTip® connectivity.
The actual number of available engagements should be monitored according to the manufacturer's operating instructions. The tool is categorized as disposable and is not intended to be refilled. Replacing the cleaner after its available cleaning material has been consumed helps maintain consistent operation.
Cable Assembly Factory Applications
In cable assembly production, connector cleanliness may need to be verified during multiple stages of assembly, testing and packaging. The OptiTip® II Cleaner Kit provides a convenient method for cleaning compatible cable assemblies without preparing cleaning solvents or installing replacement cartridges.
Its push-style operation can also support consistent work procedures across production teams. Appropriate connector inspection equipment should be used when required to verify the end-face condition before mating, testing or releasing the cable assembly.
Field Installation and Maintenance Applications
Fiber optic technicians can use the US Conec 15639 during OptiTip® cable installation, commissioning, troubleshooting and preventive maintenance. The cleaner supports both cable assemblies in hand and connectors positioned behind a panel, making it suitable for different stages of a field service procedure.
For reliable results, both connector interfaces should be inspected before mating. If contamination is found, the connector should be cleaned and inspected again. Connectors should not be mated until their end faces meet the applicable acceptance criteria.
US Conec 15639 OptiTip® II Cleaner Kit Applications
- Cable assembly manufacturing and testing
- Fiber optic field installation
- Cleaning unmated OptiTip® cable assemblies
- Cleaning in-situ connectors behind panels
- Fiber optic network commissioning
- Connector inspection and cleaning procedures
- Preventive fiber network maintenance
- Optical troubleshooting and service work
US Conec 15639 IBC™ Brand OptiTip® II Cleaner Kit Specifications
| Specification | Details |
|---|---|
| Manufacturer | US Conec |
| Part Number | 15639 |
| Product Name | IBC™ Brand Cleaner OptiTip® II Kit |
| Brand | IBC™ |
| Product Category | Fiber Optic Connector Cleaning Tool |
| Style | Push-Style Port Cleaner |
| Connector Type | OptiTip® |
| Ferrule Size or Type | MT |
| Cleaning Function | In-situ or unmated cable assembly |
| Use Type | Disposable |
| Number of Cleaning Engagements | 525+ |
| Cleaning Material | Anti-static, non-fraying cleaning material |
| Operation | Push-to-clean action |
| Primary Applications | Cable assembly factories, field installations and behind-panel connector cleaning |
| Referenced Inspection Standard | IEC 61300-3-35 |
The US Conec 15639 IBC™ Brand OptiTip® II Cleaner Kit combines straightforward push operation, anti-static cleaning material and more than 525 cleaning engagements in a disposable tool. It is a practical solution for organizations that manufacture, install or maintain cable assemblies using compatible OptiTip® connectors.