AFL FCC2 Enhanced Fiber Connector Cleaner and Preparation Fluid
AFL FCC2 Enhanced Fiber Connector Cleaner and Preparation Fluid is a nonflammable, residue-free solvent for cleaning fiber connector end-faces and bare optical fibers before termination or fusion splicing. It removes oils, salts, dust, dirt, and uncured epoxy while dissipating static charge. Its spill-resistant three-way dispenser supports fiber wipes, connector cleaning tips, and spray applications, providing up to 400 or more cleanings per can. Available from Simbol Test Systems, an authorized Canadian distributor and service center for AFL and Fujikura products.
AFL FCC2 Enhanced Fiber Connector Cleaner and Preparation Fluid
AFL FCC2 Enhanced Fiber Connector Cleaner and Preparation Fluid is a nonflammable, environmentally safe, and residue-free solvent engineered for cleaning fiber optic connector end-faces and bare optical fibers. It removes common contaminants that can interfere with optical performance, fiber termination, and fusion splicing preparation.
Contamination such as dust, dirt, oils, salts, and uncured epoxy can increase insertion loss, reflectance, and measurement uncertainty. Debris on a connector may also transfer to another optical interface during mating. FCC2 supports controlled wet-cleaning procedures for fiber optic connectors, ferrules, exposed glass fibers, and compatible optical components.
The 3 oz. spill-resistant container uses a three-way dispenser that supports several cleaning methods. It can operate as a tap dispenser for optical wipes, a fluid well for compatible connector cleaning tips, or a spray nozzle for cleaning larger areas. This versatile design supports field service, laboratory, production, test, termination, and fusion splicing workflows.
Residue-Free Cleaning for Fiber Connectors and Bare Fiber
The AFL FCC2 Fiber Connector Cleaner is designed to evaporate without leaving residue on compatible optical surfaces. Residue-free performance is important because material left on a connector or bare fiber can attract additional contamination or interfere with optical transmission and fiber processing.
- Fiber connector cleaning: Removes contamination from compatible connector ferrules and end-faces.
- Bare fiber preparation: Cleans exposed optical fiber before field termination or fusion splicing.
- Contaminant removal: Helps remove oils, salts, dust, dirt, debris, and uncured epoxy.
- Residue-free formulation: Evaporates without leaving unwanted cleaning residue on compatible surfaces.
- Static dissipation: Helps dissipate electrostatic charge that can attract airborne particles.
- Nonflammable fluid: Supports safer storage, transport, and professional cleaning workflows.
- Multiple surface compatibility: Suitable for compatible glass, ceramic, metal, plastic, and plastic optical fiber surfaces.
- Three-way dispenser: Supports wipe dispensing, connector cleaning tips, and spray application.
- Extended use: Provides up to 400 or more cleaning applications per can, depending on technique and fluid usage.
Three-Way Dispenser for Multiple Cleaning Methods
The FCC2 container integrates three dispensing methods into one compact package. This provides technicians with flexibility when cleaning different fiber optic components and preparation tools.
The tap dispenser allows a controlled amount of fluid to be applied to compatible optical-grade wipes. Pressing a wipe against the dispenser moistens a localized section, supporting a wet-to-dry cleaning technique without saturating the entire wipe.
The dispenser also includes a well for compatible AFL Connector Cleaning Tips. A tip can be moistened with a controlled amount of fluid before cleaning supported connector interfaces and other small optical surfaces.
The spray nozzle provides broader application when cleaning larger compatible areas. Use only the amount of fluid required for the procedure and prevent excess liquid from entering instruments, connector ports, or electrical assemblies.
Wet-to-Dry Fiber Connector Cleaning
A wet-to-dry cleaning method combines the contaminant-removal benefits of FCC2 with the absorption and mechanical wiping action of an optical-grade wipe or compatible connector cleaner.
Apply a small amount of FCC2 to a clean section of the wipe. Move the connector end-face from the moistened area toward a clean, dry section in one continuous direction. This helps dissolve and lift contamination before the dry portion removes the fluid and suspended debris.
Do not move the connector repeatedly over the contaminated area because this may redeposit debris. Always use a clean wipe area for each connector and inspect the end-face after cleaning whenever suitable inspection equipment is available.
Bare Fiber Preparation Before Fusion Splicing
After coating removal, bare optical fiber may retain coating residue, oils, dust, and other contamination. Cleaning the exposed glass before cleaving helps prevent debris from contaminating the cleaver, fiber holders, fusion splicer V-grooves, or surrounding preparation equipment.
FCC2 can be applied to an optical-grade wipe for cleaning the stripped fiber. Hold the fiber carefully and draw it through the moistened wipe using the preparation method appropriate for the fiber type. Avoid excessive pressure, repeated bending, or direct contact with the cleaned glass.
The fiber should be allowed to dry before it is placed into the cleaver or fusion splicer. Inspect specialty or high-strength fibers according to the applicable preparation procedure because handling and cleaning requirements may vary.
Static Dissipation and Contamination Control
Electrostatic charge can attract airborne dust to connector end-faces and other optical surfaces. FCC2 helps dissipate static charge during cleaning, reducing the tendency of a freshly cleaned surface to attract additional particles immediately.
Static control is particularly useful in dry laboratories, production areas, equipment rooms, and field environments where dust can quickly return to the optical interface. Proper storage, clean dust caps, and inspection remain important after cleaning.
Keep the FCC2 container closed when it is not in use. Optical wipes, cleaning tips, and other accessories should remain protected from dust and handled only with clean hands or suitable gloves.
Safe Transport and Convenient Field Use
FCC2 is identified as not hazardous and not regulated for common modes of transport, including air cargo. Its nonflammable formulation and spill-resistant container make it practical for inclusion in fiber optic cleaning, termination, installation, and fusion splicing kits.
The compact 3 oz. container is suitable for field technicians who need a portable cleaning solvent without carrying a large bottle. The dispenser controls fluid delivery and helps reduce unnecessary solvent use.
Users should still follow workplace handling procedures, review the current safety information, keep the container away from incompatible materials, and use the fluid only for supported cleaning applications.
Compatible Fiber Optic Cleaning Products
FCC2 can be used with compatible AFL FiberWipes, optical-grade wipes, and Connector Cleaning Tips. It can also support wet-to-dry cleaning workflows with suitable cassette cleaners or connector cleaning tools when the applicable procedure permits fluid use.
Optical-grade wipes are recommended because general-purpose tissues and paper products may leave lint, scratch sensitive surfaces, or contain binders and contaminants. Each wipe or cleaning surface should be used only once on the optical interface.
After cleaning, inspect connector end-faces using a compatible fiber inspection system. If contamination remains, repeat the cleaning process using a new wipe section or clean tip rather than reusing a contaminated surface.
Applications for AFL FCC2 Cleaning Fluid
- Cleaning fiber optic connector end-faces
- Cleaning bare fiber before fusion splicing
- Cleaning bare fiber before field termination
- Removing oils, salts, dust, dirt, and loose debris
- Removing compatible uncured epoxy residue
- Wet-to-dry cleaning with optical-grade wipes
- Moistening compatible connector cleaning tips
- Cleaning compatible glass, ceramic, metal, and plastic optical surfaces
- Fiber optic laboratory and production cleaning
- Telecom, data center, broadband, FTTH, and field-service applications
Why Buy AFL FCC2 from Simbol Test Systems?
Simbol Test Systems supplies professional fiber optic cleaning fluids, optical-grade wipes, connector cleaners, inspection systems, fusion splicers, fiber cleavers, and related preparation accessories. As an authorized Canadian distributor and service center for AFL and Fujikura products, we support customers with product selection, repair, maintenance, and technical service.
Simbol Test Systems can help customers select FCC2 cleaning fluid, compatible FiberWipes, connector cleaning tips, cassette cleaners, One-Click cleaners, and inspection equipment for field, laboratory, production, termination, and fusion splicing applications.
AFL FCC2 Product Specifications
| Brand | AFL |
| Model | FCC2 |
| Product Name | AFL FCC2 Enhanced Fiber Connector Cleaner and Preparation Fluid |
| Product Type | Fiber optic connector cleaner and bare-fiber preparation fluid |
| Formulation | Nonflammable, environmentally safe, residue-free cleaning solvent |
| Container Size | 3 oz. / 85 g |
| Dispenser | Three-way tap, fluid well, and spray dispenser |
| Approximate Cleaning Capacity | Up to 400 or more cleanings per can, depending on application technique |
| Static Control | Helps dissipate electrostatic charge |
| Primary Contaminants | Oils, salts, dust, dirt, debris, and compatible uncured epoxy |
| Primary Applications | Connector end-face cleaning and bare-fiber preparation before termination or fusion splicing |
| Compatible Materials | Compatible glass, ceramic, metal, plastic, and plastic optical fiber surfaces |
| Transport Classification | Not hazardous and not regulated for common modes of transport, including air cargo |
AFL FCC2 Ordering Information
| Description | Package | AFL No. |
|---|---|---|
| FCC2 Fiber Connector Cleaner and Preparation Fluid | One 3 oz. / 85 g can | FCC2-00-0902 |
| FCC2 Fiber Connector Cleaner and Preparation Fluid | Case of 12 cans | FCC2-00-0903 |
Recommended Cleaning Workflow
- Inspect the optical connector before cleaning when suitable inspection equipment is available.
- Apply a small amount of FCC2 to a clean optical-grade wipe or compatible cleaning tip.
- Clean the connector or bare fiber using the appropriate wet-to-dry method.
- Allow the cleaned surface to dry completely.
- Reinspect the connector end-face before mating or testing.
- Repeat with a new cleaning surface if contamination remains.
Cleaning and Handling Guidance
Use FCC2 only with compatible materials and cleaning accessories. Do not reuse contaminated wipes or cleaning tips. Avoid applying excessive fluid directly into optical test ports, fusion splicers, electrical equipment, or enclosed components.
Inspect and clean both sides of an optical connection before mating. Installing a clean connector into a contaminated adapter or mating sleeve can transfer debris and contaminate the newly cleaned end-face.
Professional Support and Availability
Contact Simbol Test Systems with the connector type, cleaning application, required package quantity, and related inspection or preparation requirements to request AFL FCC2 availability, compatible wipes, connector cleaning tools, inspection systems, or technical support.